Welcome Reception
ROOM P1 / 18:00 - 20:00 / Nov. 7
Opening
ROOM A / 9:00 - 9:30 / Nov. 8
Plenary Talk 1
ROOM A / 9:30 - 10:00 / Nov. 8
| PL-1 |
Application of Superconducting Technologies to Railway Systems
OHSAKI Hiroyuki (The University of Tokyo, Japan) |
Asian Topics 1
ROOM A / 10:30 - 11:50 / Nov. 8
| AT-1 |
Development of High-Tc superconductor applications in New Zealand: Present status and future prospects
BUMBY Chris (Victoria University of Wellington, New Zealand) |
| AT-2 |
Overview of HTS Large Scale Application in Japan
SATO Kenichi (Japan Science and Technology Agency, Japan)
|
Wires and Tapes (HTS) 1
ROOM P / 13:20 - 15:00 / Nov. 8
| 1P-p01 |
Evaluation of the property of DI-BSCCO HT-NX tape under cyclic tensile load
KASABA Koichi, KASABA Kazunari (University of Toyama); OSABE Goro, KADOYA Takuro (Sumitomo electric industries,
LTD.) |
| 1P-p02 |
Recent development of mechanical and electromagnetic performances
KIKUCHI Masashi, OSABE Goro, KAGIYAMA Tomohiro, YAMAZAKI Kohei, NAKASHIMA Takayoshi, TAKEDA Soichiro, KADOYA Takuro,
OKADA Tomoyuki, KOBAYASHI Shinichi, KATO Takeshi, HAYASHI Kazuhiko (SEI); OSAMURA Kozo (RIAS); KITAGUCHI Hitoshi (NIMS);
SHIMOYAMA Junichi (AGU) |
| 1P-p03 |
Verification of Feasibility of LTS/HTS Hybrid Superconducting Tape
HASEGAWA Shin, ITO Satoshi, HASHIZUME Hidetoshi (Tohoku Univ.) |
| 1P-p04 |
Experimental Investigation of Strain Distribution of YBCO under Complex Bending Situations and its Effect on Superconducting
Property
AKAI Haruka, YAGAI Tsuyoshi, LEE Dong Ryun (Sophia University); KAMADA Hiroharu, NOMURA Shinichi (Meiji University);
TSUTSUI Hiroaki (Tokyo Institute of Technology); NAKAMURA Taketsune (Kyoto University); CHIKARAISHI Hirotaka, YANAGI
Nagato, IMAGAWA Shinsaku (NIFS); |
| 1P-p05 |
Strain dependence of Jc in REBCO coated conductor controlled domain
CHIBA KOHEI, AWAJI SATOSHI (IMR, Tohoku Univ.); |
| 1P-p06 |
Degradation probability prediction of REBCO coils based on the Weibull analysis
MUTO Shogo, FUJITA Shinji, SATO Hiroki, AKASHI Kazuya, YOSHIDA Tomo, IIJIMA Yasuhiro, NAOE Kunihiro (Fujikura
Ltd.) |
| 1P-p07 |
Electro-thermal Analysis of Core Cable Consisted Of YBCO Coated Conductor
Fu Shanshan, Qiu Ming, Guo Jianbo, Zhu Jiahui, Chen Panpan, Rao Shuangquan (China Electric Power Research Institute);
Yuan Weijia (University of Bath) |
Wires and Tapes (MgB2)
ROOM P / 13:20 - 15:00 / Nov. 8
| 1P-p08 |
Superior Jc-B-T characteristics of 10 micrometer-thick MgB2 film on Cu plate and tape
KUSUNOKI Toshiaki, YAMAMOTO Hiroyuki, KODAMA Motomune, KOTAKI Hiroshi, TANAKA Hideki (Hitachi Ltd.); NISHIJIMA
Gen, MATSUMOTO Akiyoshi (National Institute for Material Science); HORII Shigeru, DOI Toshiya (Kyoto University) |
| 1P-p09 |
Mechanism for High Critical Current Density in MgB2 Wire Prepared by Mechanical Milling Technique
Kodama Motomune (Hitachi, Ltd., The Univ. of Tokyo); Tanaka Hideki, Okamoto Kazutaka (Hitachi Ltd.); Yamamoto
Akiyasu (Tokyo Univ. of Agriculture and Tech.); Shimoyama Jun-ichi (Aoyama Gakuin Univ.); Kishio Kohji (The Univ.
of Tokyo); |
| 1P-p10 |
Influence of ‘only swaging’ on microstructure and superconducting properties of MgB2 superconducting wire
SAITO Yusuke, MURAKAMI Masato (Shibaura Institute of Technology); YE Shujun (Tohoku University); KUMAKURA Hiroaki
(National Institute for Materials Science) |
| 1P-p11 |
Investigation of Magnetization of MgB2 Wires with Magnetic Sheath for Nondestructive Characterization of
Their Local Critical Current Distributions
HIGASHIKAWA Kohei, TATARA Hiroshi, INOUE Masayoshi (Kyushu University); MATSUMOTO Akiyoshi, KUMAKURA Hiroaki (National
Institute for Materials Science); KISS Takanobu (Kyushu University) |
| 1P-p12 |
Evaluation of critical current density of MgB2 wires under conduction cooling
TOMITA Masaru,
ONJI Taiki, ISHIHARA Atsushi, KOBAYASHI Yusuke, AKASAKA Tomoyuki, FUKUMOTO Yusuke (RTRI); YAGAI Tsuyoshi (Sophia
Univ.); HIRANO Naoki (Chubu Electric Power); SHINTOMI Takakazu (KEK); HAMAJIMA Takataro (Tohoku Univ.) |
| 1P-p13 |
Critical Current Properties of MgB2 Conductors Depending on Strains Caused by Cabling Processes
ANDO Kennosuke, MIZUOCHI Sora, KAMIBAYASHI Masahiro, JIMBO Mana, TAKAO Tomoaki, YAGAI Tsuyoshi (Sophia University);
SHINTOMI Takakazu, MAKIDA Yasuhiro (High Energy Accelerator Research Organization); HAMAJIMA Takataro (Tohoku University);
KOMAGOME Toshihiro, TSUKADA Kenichi (Mayekawa Mfg. Co., Ltd); HIRANO Naoki (Chubu Electric Power Co., Inc.); TOMITA
Masaru, ONJI Taiki (Railway Technical Res. Inst.); INOUE Masayoshi, HIGASHIKAWA Kouhei, KISS Takanobu (Kyushu University)
|
| 1P-p60 |
Magnetization and AC losses in multifilamentary MgB2 wires
Rudnev Igor, Abin Dmitry, Mineev Nikolay, Osipov Maxim, Pokrovskii Sergei (National Research Nuclear University
MEPhI (Moscow Engineering Physics Institute), Moscow, Russia and International Laboratory of High Magnetic Fields
and Low Temperatures, Wroclaw, Poland)
|
Large Scale Cryogenics
ROOM P / 13:20 - 15:00 / Nov. 8
| 1P-p14 |
Withdrawn
|
| 1P-p15 |
Moved to 3B-a05
|
| 1P-p16 |
Performance test of prototype cryomodule for RAON
Kim Youngkwon, Jo Young Woo, Choi Jong Wan, Lee Min Ki, Shin Jae Hee, Lee Ki Woong, Yoon Sung Woon, Kim Woo Kang
(RISP/IBS) |
| 1P-p17 |
On the Possibility of Using HTS Cable Lines in Construction of Submarine Power Bridges as for Connection of Sakhalin
and Hokkaido Islands
IVANOV Yury, SUN Jian, VYATKIN Vladimir, KANDA Masae, WATANABE Hirofumi, CHIKUMOTO Noriko, INOUE Noriyuki, TAKANO
Hirohisa, YAMAGUCHI Satarou (Chubu University); SYTNIKOV Victor, BEMERT Sergey, RYABIN Timofey (JSC R&D Center
@ FGC UES); ROMASHOV Maxim (JSC Cryogenmash) |
Cryocooler
ROOM P / 13:20 - 15:00 / Nov. 8
| 1P-p18 |
Numerical Calculation of Active Magnetic Refrigeration Cycle - Structural Effects of Magnetic Refrigerant on Cooling
Properties -
Yoshimoto Narihiro (Chiba University); Saito Akiko (Toshiba Corporation); Nakagome Hideki, Kung Seiko (Chiba University)
|
| 1P-p19 |
Development of a Dual-Displacer GM Cryocooler
XU Mingyao, BAO Qian, MORIE Takaaki (Sumitomo Heavy Industries, Ltd.) |
| 1P-p20 |
Design of High Voltage Electrical Breakdown Strength measuring system at 1.8K with a G-M cryocooler
LI JIAN, HUANG RONGJIN, LI XU, XU DONG, LIU HUIMING, LI LAIFENG (TIPC) |
| 1P-p21 |
Development of High Cooling Capacity Pulse Tube Cryocooler
HIRAYAMA TAKASHI, LI RUI (Cryogenics Division, Precision Equipment Group, Sumitomo Heavy Industries, Ltd); XU
MINGYAO (Technology Research Center, Sumitomo Heavy Industries, Ltd); ZHU SHAOWEI (School of Mechanical Engineering,
Tongji University) |
| 1P-p22 |
Development of a Dewar for the Soft X-ray Spectrometer on the X-ray astronomy satellite (ASTRO-H)
YOSHIDA Seiji, KANAO Ken’ichi, MIYAOKA Mikio, HOSHIKA Shunji, NARASAKI Katsuhiro, TSUNEMATSU Shoji (SHI); MITSUDA
Kazuhisa, YAMASAKI Noriko, TAKEI Yoh, SATO Yoichi (JAXA); FUJIMOTO Ryuichi (Kanazawa University); EZOE Yuichiro (TMU)
|
| 1P-p23 |
Cryogenic Adsorption of CO2, N2 and He in Activated Carbon
Shen Fuzhi,
Liu Huiming, Xu Dong, Zhang Hengcheng, Lu Junfeng (Technical Institute of Physics and Chemistry,CAS); Li Laifeng
(Technical Institute of Physics and Chemistry,) |
| 1P-p24 |
The effect of helium adsorption at different temperature on dead space calibration in a cryo-sorption setup
Zou Longhui,
Liu Huiming, Xu Peng, Gong Linghui (Technical Institute of Physics and Chemistry,CAS) |
| 1P-p25 |
Summer Seminar for Cryogenic Technology 2016 -Team Rotary Valve-
TERAO Yutaka (University of Tokyo); WATANABE Hirochika (JASTEC); NAKADATE Yuya, KUROSAWA Yuta (Meisei University);
PRATHEPHA Krittanon, KUNNAWUT Mattawan (Mahasarakham University); ON－AI Kritsada, CHOKTAVEECHANGMAI Naruchon, COMSAWANG
Paisan (Silpakorn University); MIYAMOTO Takahiro (University of Tokyo); SAGA Suguru, SUGANO Masato, BIRUKAWA Ken,
YOSHIDA Masahiro (National Institute of Technology, Akita College) |
SQUIDs and Detectors
ROOM P / 13:20 - 15:00 / Nov. 8
| 1P-p26 |
Reduction of the surface resistance of YBCO thin films by Ion irradiation and application it to NMR pickup coils
OHSHIMA Shigetoshi, TAKANASHI Naoki, SAITO Atsushi (Yamagata University) |
| 1P-p27 |
Development of point-contact spectrometer for spin polarization measurements
SHIGA MASANOBU, NISHIMURA NAOTO, TAKATA HIROKI, YUJI INAGAKI (Department of Applied Quantum Physics, Faculty of
Engineering, Kyushu University); KAMBARA HIROSHI, TENYA KENICHI (Faculty of Education, Shinshu University); KAWAE
TATSUYA (Department of Applied Quantum Physics, Faculty of Engineering, Kyushu University); |
| 1P-p28 |
Development of X-ray spectroscopy system for low acceleration voltage SEMs by superconducting-tunnel-junctions
Fujii Go, Ukibe Masahiro, Shiki Shigetomo, Ohkubo Masataka (National Institute of Advaced Industrial Science and
Technology) |
| 1P-p29 |
Terahertz heterodyne mixing with YBaCuO hot electron bolometers
DEGARDIN Annick, LADRET Romain (UPMC Univ. Paris 06); JAGTAP Vishal (GeePs - CentraleSupélec); KREISLER Alain
(UPMC Univ. Paris 06); |
| 1P-p30 |
High-Tc SQUID based magnetic resonance imaging in ultra-low magnetic field
Liao Shu-Hsien, Chen Jhih-Hao, Wu Pei-Che, Yang Hong-Chang, Horng Herng-Er (National Taiwan Normal University)
|
| 1P-p31 |
Biofunctionalized magnetic nanoparticles for magnetic immunoassays by using high-Tc SQUID-based ac susceptometer
Yang Hong-Chang, Liao Shu-Hsien, Su Yu-Kai, Chieh Jen-Jie, Horng Herng-Er (National Taiwan Normal University)
|
| 1P-p32 |
In-vivo Multifunctional Imaging by the Endoscope Type of Scanning SQUID Biosusceptometry
Horng Herng-Er, Chieh Jen-Jie (NTNU); Huang Kai-Wen (NTUH); Liao Shu-Hsien, Lee Yi-Yan, Hsiao Pei-Yi, Yang Hong-Chang
(NTNU) |
Thin Films and Devices
ROOM P / 13:20 - 15:00 / Nov. 8
| 1P-p33 |
MOCVD Growth and Characterization by X-ray Diffraction of Epitaxial Bi2Sr2CaCu2O8+δ Thin Films
ENDO Kazuhiro (Kanazawa Inst. Technol.); AEISAWA Shunichi (National Inst. Mater. Sci.); TATENO Yasushi (Kanazawa.
Inst. Technol., Furuuchi Chem. Co.); KAWAI Shinya, WADA Michiaki, KANEKO Toshiyuki, TSUYUMOTO Isao (Kanazawa Inst.
Technol.); BADICA Petre (National Inst. Mater. Phys.) |
| 1P-p34 |
Thermoelectric performance investigation of Ag2Te1-xSex at cryogenic temperature
Han Yemao, Zhou Min, Li Laifeng (TIPC) |
| 1P-p35 |
Growth of Practical SrTiO3 Single Crystals with a Diameter of 32 mm and Long Length up to 60 mm
TATENO Yasushi (Kanazawa Inst. Technol., Furuuchi Chem. Co.); BADICA Petre (National Inst. Mater. Phys.); ARISAWA
Shunichi (National Inst. Mater. Sci.); ENDO Kazuhiro (Kanazawa Inst. Technol.); |
| 1P-p36 |
Bi-based HTS Thin Films as Potential Materials to be used at 300-570 K in Power Electronics Applications
KAWAI Shinya (Kanazawa Inst. Technol.); TSUCHIYA Tetsuo (National Inst. Adv. Ind. Sci. Tech.); ARISAWA Syunichi
(National Inst. Mater. Sci.); TATENO Yasushi (Furuuchi Chemical Co.,Kanazawa Inst. Technol.); TSUYUMOTO Isao (Kanazawa
Inst. Technol.); BADICA Petre (National. Inst. Mater. Phys.); ENDO Kazuhiro (Kanazawa Inst. Technol.); |
| 1P-p37 |
A cryogenic event-driven encoder using single-flux-quantum circuits for a 64-pixel space-resolved superconducting
single photon detector system
MIYAJIMA Shigeyuki, YAMASHITA Taro, YABUNO Masahiro, MIKI Shigehito, TERAI Hirotaka (National Institute of Information
and Communications Technology) |
| 1P-p38 |
Investigation on Cryogenic Systems for Superconductor Digital Electronics
FUJIMAKI Akira, SUZUKI Masato, ITO Yuki, AKAIKE Hiroyuki, TANAKA Masamitsu (Nagoya University) |
Stability 1
ROOM P / 13:20 - 15:00 / Nov. 8
| 1P-p39 |
Comparison of Thermal Stability of the Conduction Cooled HTS Coils Without Insulation, With Different Turn to Turn
Insulation
Bae Joonhan (Korea Electrotechnology Research Institute) |
| 1P-p40 |
Measurement and Analysis of Transport Current Characteristics of HTS Coil Composed by Stacking No-insulation Double
Pancake Element Coils
FUKUI Satoshi,
HONDA Yuya, SAITO Yuma, UTSUNOMIYA Ryuji, OGAWA Jun, SATO Takao (Niigata University); WATANABE Tomonori, NAGAYA
Shigeo, HIRANO Naoki (Chubu Electric Power Co., Inc.) |
| 1P-p41 |
Thermal Stability of No-Insulation REBCO Pancake Coil -Evaluation on Local Normal Transition Characteristic-
YASHIRO Satoka, KATSUMATA Kazuki, ZHENG Qiyi, ISHIYAMA Atsushi (Waseda University); NOGUCHI So (Hokkaido University);
NAGAYA Shigeo, WATANABE Tomonori (Chubu Electric Power Co.,Inc) |
| 1P-p42 |
Numerical Estimation of Characteristic Resistance for No-insulation HTS Coils
Yang Dong Gyu, Song Jung-Bin, Choi Yoon Hyuck, Kim Young-Gyun, Lee Haigun (Department of Materials Science and
Engineering, Korea University) |
| 1P-p43 |
Effect of Grease Insulation on Thermal-Quench Behaviors of GdBCO Single-Pancake Coils
Kim Seong-Gyeom, Choi Yoon Hyuck, Yang Dong Gyu, Jeong Seol-Hee, Lee Haigun (Department of Materials Science and
Engineering, Korea University) |
| 1P-p44 |
Thermal and Electrical Characteristics of GdBCO Coils Impregnated with Epoxy Composite Containing Cubic and Hexagonal
Boron Nitride Fillers
Jeong Seol-Hee, Song Jung-Bin, Kim Kwang Lok, Choi Yoon Hyuck, Lee Haigun (Department of Materials Science and
Engineering, Korea University) |
| 1P-p45 |
Influence of High Thermal Conduction Plastic on Thermal Stability in Cryogen-free HTS Superconducting Coil
TAKAO Tomoaki,
TANAKA Yuki, SUGA Shota, TAKANO Taro, TSUKAMOTO Osami (Sophia University); YAMANAKA Atsuhiko (Nagoya University)
|
| 1P-p46 |
Withdrawn
|
| 1P-p47 |
Quench Characteristics of REBCO Impregnated Coil
WANG Xudong, TSUCHIYA Kiyosumi (KEK); FUJITA Shinji, MUTO Shogo, IIJIMA Yasuhiro (Fujikura Ltd.); |
AC Losses
ROOM P / 13:20 - 15:00 / Nov. 8
| 1P-p48 |
Development of AC Losses Measuring Apparatus for Cryocooled Superconducting Coil
KAWAKAMI Tatsuhiko, NAKAGAWA Ryoji, HORI Chishin, IMAMURA Yukinobu (Hitachi Ltd., Research & Development Group,
Center for Technology Innovation - Energy); IIO Masami, SASAKI Ken-ichi (KEK); |
| 1P-p49 |
Transport ac loss in a rectangular thin strip with typical current waveforms and its scaling law
Shuo Li (Northeastern University); Du-Xing Chen (Spain Barcelona autonomous university); Da-Zhi Wang (Northeastern
University) |
| 1P-p50 |
Additional AC loss properties of Y-based superconducting parallel conductors
OKI Soichiro, NABEKURA Kohei, IWAKUMA Masataka (Kyushu University) |
FCLs / Transformers
ROOM P / 13:20 - 15:00 / Nov. 8
| 1P-p51 |
Cooperation of the current limiting function of superconducting transformers and cables
TOKUCHI Takayuki, IWAKUMA Masataka, YOSHIDA Koichi (Kyushu University); TOMIOKA Akira, KONNO Masayuki (Fuji Electric
Co.,Ltd.); ADACHI Kazuhisa (SWCC Showa Cable Systems Co.,Ltd.) |
| 1P-p52 |
Development of a flux-coupling type SFCL and its application for transient performance enhancement of grid-connected
photovoltaic generation system
Chen Lei, Chen Hongkun, Yang Jun (Wuhan University); Yan Sinian, Ren Li (Huazhong University of Science and Technology)
|
| 1P-p53 |
Verification Test for a Flux-coupling Type Superconducting Fault Current Limiter
Ren Li, Yan Sinian, Zuoshuai Wang, Ying Xu (Huazhong University of Science and Technology) |
| 1P-p54 |
Visualization Examination of Improvement of Recovery Characteristics of GdBCO Tape with Several Surface Conditions
for Resistive Fault Current Limiter
TAMASHIMA Manami, TAKAYA Satoshi, SHIRAI Yasuyuki, SHIOTSU Masahiro (Kyoto University); HONDA Genki, ISOJIMA Shigeki
(Electric Industries, LTD); |
| 1P-p55 |
Estimation of the Winding temperature of the High Temperature Superconducting Transformer by Pick-up coil pairs
Matsumoto Takuma, Sakemoto Keisuke, Kawagoe Akifumi (Kagoshima University); |
Japan’s R&D Program
ROOM P / 13:20 - 15:00 / Nov. 8
| 1P-p56 |
Promising Results towards HTS Application in JST/S-Innovation Program
SATO Kenichi (Japan Science and Technology Agency, Japan) |
Wires and Tapes (Cuprate, MgB2)
ROOM A / 15:20 - 18:20 / Nov. 8
| 1A-p01 |
Invited Progress and Commercialization of DI-BSCCO(Bi2223) Wires and Their
Applications
Hayashi Kazuhiko (Sumitomo Electric Industries, LTD.) |
| 1A-p02 |
Invited Enhanced In-field Properties for BMO doped REBCO coated conductors
by a Hot-wall PLD Technique
Igarashi Mitsunori, Kakimoto Kazuomi, Fujita Shinji, Hirata Wataru, Muto Shoto, Yoshida Tomo, Iijima Yasuhiro,
Naoe Kunihiro (Fujikura Ltd.) |
| 1A-p03 |
Invited Progress of 2G HTS Wire Development at SuperPower
SAKAMOTO HISAKI (Furukawa Electric CO.,LTD.(FEC)); NAKASAKI RYUSUKE, BROWNSEY PAUL, SUNDARAM AARTHI, ZHANG YIFEI,
HAZELTON DREW, FUKUSHIMA TORU (SuperPower Inc.(SPI)) |
| 1A-p04 |
Development of Coated Conductors with High In-field Properties by TFA-MOD
IZUMI TERUO, NAKAOKA KOICHI, MACHI TAKATO (AIST); MIURA MASASHI (SEIKEI UNIV.); KISS TAKANOBU (KYUSHU UNIV.);
AWAJI SATOSHI (TOHOKU UNIV.); KATO TAKEHARU (JFCC) |
| 1A-p05 |
YBCO coated conductors with conductive buffer layers to develop low-cost 2G superconducting wires
ICHINOSE Ataru (CRIEPI); HORII Shigeru, DOI Toshiya (Kyoto Univ.) |
| 1A-p06 |
Invited Longitudinal Homogeneity of Multifilament MgB2 Wire
TANAKA Hideki, SUZUKI Takaaki, KODAMA Motomune, NISHI Kazuya (Hitachi, Ltd.); INOUE Masayoshi, HIGASHIKAWA Kouhei,
KISS Takanobu (Kyushu University); MATSUMOTO Akiyoshi, NISHIJIMA Gen (NIMS) |
| 1A-p07 |
Invited Three-dimensional Microstructural Analysis of MgB2 Wires
by Use of X-ray Tomography
INOUE Masayoshi, HIGASHIKAWA Kohei, KISS Takanobu (Kyushu Univ.); MATSUMOTO Akiyoshi, KUMAKURA Hiroaki (NIMS);
TAKAO Tomoaki (Sophia Univ.); MAKIDA Yasuhiro, SHINTOMI Takakazu (KEK); HAMAJIMA Takataro (Maekawa) |
| 1A-p08 |
moved to 1P-p60
|
Power Applications 1
ROOM B / 15:20 - 18:20 / Nov. 8
| 1B-p01 |
Invited Korean HTS Power Application
Park Minwon (Changwon National University) |
| 1B-p02 |
Invited Development of a 3φ-66/6.9kV-2MVA REBCO superconducting transformer
IWAKUMA Masataka (Kyushu University); HAYASHI Hidemi, EGUCHI Tohru (Kyushu Electric Power Co. Inc.); SAKAKI Kizen,
TOMIOKA Akira, KONNO Masayuki (Fuji Electric Co. Ltd.); IIJIMA Yasuhiro (Fujikura Co.); YOSHIDA Shigeru, HIRAI Hirokazu,
SUZUKI Yoshiaki (Taiyo Nippon Sanso Co. Ltd.); IBI Akira, MACHI Takato, IZUMI Teruo (AIST) |
| 1B-p03 |
Feasibility study for a new type of dc SFCL
Xin Ying, Wei Zhiqiang (Tianjin University); Tian Bo (Futong Group, Co.); Wang Changqi, Huang Penghao (Tianjin
University); Xia Fangmin (Futong Group, Co.); Li Quan (University of Edinburgh) |
| 1B-p04 |
Investigation of Fault Current Limiting Properties of RE-123 Coated Conductors Based on Hardware-in-the-loop Simulation
for DC Railway Feeder System
HIGASHIKAWA Kohei, TAJIMA Masahiro, URASAKI Shogo, INOUE Masayoshi (Kyushu University); FUKUMOTO Yusuke, TOMITA
Masaru (Railway Technical Research Institute); KISS Takanobu (Kyushu University) |
| 1B-p05 |
A Numerical Simulation Model of the Current-limiting Impedance for High Temperature Superconducting Fault Current
Limiter(SFCL) With PSCAD/EMTDC and MATLAB
Zhu Jiahui (China Electric Power Research Institute); Gong Jun, Liu Erwei (School of Electric Engineering, Beijing
Jiao-tong University); Chen Panpan (China Electric Power Research Institute); Fang Jin (School of Electric Engineering,
Beijing Jiao-tong University); Liu Ruitong, Fan Wei (Liao-ning Province Electric Power Research Institute) |
| 1B-p06 |
Compact SMES with a Superconducting Film in a Spiral Trench on a Si-Wafer Formed by MEMS Technology with Possible
High Energy Storage Volume-Density Comparable to Those of Rechargeable Batteries (III)
SUZUKI Yasuhiro, IGUCHI Nobuhiro, ADACHI Kazuhiro, HIOKI Tatsumi, ICHIKI Akihisa, MOTOHIRO Tomoyoshi (Nagoya University);
SUGIMOTO Noriaki (TOYOTA Central R&D Labs.,Inc.); HSU Che-Wei, SATO Ryoto, KUMAGAI Shinya, SASAKI Minoru (TOYOTA
Technological Institute); NOH Joo-Hyong, SAKURAHARA Yuuske, OKABE Kyohei, TAKAI Osamu, HONMA Hideo (Kanto Gakuin University);
WATANABE Hideo, SAKODA Hitoshi, DOY Hideyuki (D-process Inc.); ZHOU Shuliang, NOZAKI Toshihiro (AISIN SEIKI Co.,Ltd.);
SASAGAWA Hiyoyuki (D-process Inc.); HORI Hironori, NISHIKAWA Shigeaki (AISIN SEIKI Co.,Ltd.); |
| 1B-p07 |
Development of Voltage Compensation Type Active Superconducting Current Controller
Jing Shi, Lihui Zhang, Xiao Zhou, Yuanyuan Li, Yuejin Tang, Li Ren, Jingdong Li (State Key Laboratory of Advanced
Electromagnetic Engineering and Technology, R&D Center of Applied Superconductivity, Huazhong University of Science
and Technology) |
| 1B-p08 |
Design and Analysis of Superconducting Fault Current Limiters of DC Electric Railway Feeding Systems Using Superconducting
Power Cables
GUO Zhuoran (U-tokyo) |
Cryogenic Cooling Engineering
ROOM C / 15:20 - 18:20 / Nov. 8
| 1C-p01 |
Invited Flow Boiling of Liquid Nitrogen in Mini-/Micro-channels
ZHANG Peng (Shanghai Jiao Tong University) |
| 1C-p02 |
Invited Micro-Solid Nitrogen Particulate Spray Cooling Characteristics and
its Application to Wafer Cleaning Technology
ISHIMOTO Jun (Tohoku University) |
| 1C-p03 |
Invited Heat transfer from external-heating-type MgB2 liquid hydrogen
level sensor to gas hydrogen
TAKEDA Minoru, YAMAZAKI Teruya, MAEKAWA Kazuma (Kobe Univ.) |
| 1C-p04 |
Invited Neon Turbo-Brayton Refrigerator
Yoshida Shigeru (Taiyo Nippon Sanso) |
| 1C-p05 |
Materials, Designs, and Tools for Development of High Temperature Superconducting Power Applications Cooled with Gaseous
Helium
Pamidi Ssatry, Cheetham Peter, Kim Chul Han, Kim Jin-Geun (FSU - CAPS); Graber Lukas (Georgia Tech) |
| 1C-p06 |
Application of dynamic simulation to cryogenic and superconducting toroidal magnet systems of KEK
KI Taekyung, TAKAHIRO Okamura, YOSHIDA Makoto, OGITSU Toru, IIO Masami, MAKIDA Yasuhiro (High Energy Accelerator
Research Organization (KEK)) |
| 1C-p07 |
Invited Recent Development Status of a new compact 2K Gifford-McMahon Cryocoolers
for cooling superconducting single photon detectors
Hiratsuka Yoshikatsu, Bao Qian, Xu Mingyao (Technology Research Center, Sumitomo Heavy Industries, Ltd.) |
| 1C-p08 |
Achievement of 1.5 W at 4.2 K by using a double pipe regenerator
MASUYAMA Shinji (NIT, Oshima College); NUMAZAWA Takenori (NIMS) |
Electronics
ROOM D / 15:20 - 18:20 / Nov. 8
| 1D-p01 |
Invited Ultrasound-Motivated Magnetic Imaging of Tumors Targeted by Biofunctional
Magnetic Nanoparticles
Huang Kai-Wen (Department of Surgery and Hepatitis Research Center, National Taiwan University Hospital & Graduate Institute
of Clinical Medicine, National Taiwan University);
Chieh Jen-Jie (Institute of Electro-Optical Science and Technology, National Taiwan Normal University); Yeh Chih-Kuang
(Department of Biomedical Engineering and Environmental Sciences, National Tsing Hua University); Liao Shu Hsien,
Lee Yi-Yan, Hsiao Pei-Yi, Yang Hong-Chang, Horng Herng-Er (Institute of Electro-Optical Science and Technology, National
Taiwan Normal University) |
| 1D-p02 |
Invited Moisture content measurement using HTS SQUID magnetometers
TSUKADA KEIJI, MATSUNAGA YASUAKI, SAKAI KENJI, KIWA TOSHIHIKO (Okayama University) |
| 1D-p03 |
Invited Switching from superconducting to semiconducting Y-Ba-Cu-0 detectors
KREISLER Alain, LADRET Romain, GALIANO Xavier (UPMC Univ Paris 06); JAGTAP Vishal (GeePs CentraleSupelec); DEGARDIN
Annick (UPMC Univ Paris 06); |
| 1D-p04 |
Invited Recent Progress in TES Microcalorimeters for Material Analysis
Mitsuda Kazuhisa, Hayashi Tasuku, Muramatsu Haruka, Maehisa Keisei, Yamasaki Noriko, Y. (ISAS, JAXA); Takano Akira,
Maehata Keisuke (Kyushu University); Hara Toru (NIMS) |
| 1D-p05 |
Invited Superconducting hot-electron bolometers with a twin-slot nanoantenna
Kawakami Akira (NICT); Shimakage Hisashi (Ibaraki Univ.); Horikawa Junsei (Fukui Coll.); Hyodo Masaharu (Kanazawa
Univ.); Saito Shingo, Tanaka Shukichi, Uzawa Yoshinori (NICT) |
| 1D-p06 |
Invited Eight-Bit Bit-Serial Stored-Program Computer Prototype Based on Rapid
Single-Flux-Quantum Logic
SATO Ryo, HATANAKA Yuki (Nagoya University); ANDO Yuki, KAWAGUCHI Takahiro (Kyoto University); TANAKA Masamitsu,
FUJIMAKI Akira (Nagoya University); TAKAGI Kazuyoshi, TAKAGI Naofumi (Kyoto University) |
| 1D-p07 |
Invited High Tc SQUID Application for Contaminant Detector
TANAKA Saburo, OHTANI Takeyoshi (Toyohashi Univ. of Technology) |
| 1D-p08 |
Three-Dimensional Magnetic Particles Imaging Using Multiple Pickup Coils and Small Field Gradient
TSUJITA Yuya, MUTA Masahiro, SASAYAMA Teruyoshi, ENPUKU Keiji (Kyushu University); |
Plenary Talk 2
ROOM A / 8:20 - 9:40 / Nov. 9
| PL-2 |
Present Status and Future Prospects of Applied Superconductivity in China
XIAO Liye (Chinese Academy of Science, China) |
| PL-3 |
Prospects of HTS power application in electric power grid considering the future next generation of power network
WON Young Jin, KWACK Yangho (Korea Electric Power Corporation, Korea) |
Asian Topics 2
ROOM A / 10:00 - 12:00 / Nov. 9
| AT-3 |
Application of Superconductivity & Related Cryogenics in India : Present & Future Prospect
DATTA Tripti Sekhar (Inter University Accelerator Centre, India) |
| AT-4 |
Present status of development of superconducting materials in China
MA Yanwei (Chinese Academy of Science, China) |
| AT-5 |
Present status of development of superconducting materials and wires in Korea
MOON Seung Hyun (SuNAM Co., Ltd., Korea) |
Wires and Tapes (HTS) 2
ROOM P / 13:20 - 15:00 / Nov. 9
| 2P-p01 |
Fabrication of Bi2223 thick films by sintering under low PO2 atmospheres
TAKEDA Yasuaki, KISHIO Kohji (University of Tokyo); KOIKE Ryo, MOTOKI Takanori, SHIMOYAMA Jun-ichi (Aoyama gakuin
University); NAKASHIMA Takayoshi, KAGIYAMA Tomohiro, KOBAYASHI Shin-ichi, HAYASHI Kazuhiko (Sumitomo Electric Industries,
Ltd.);
|
| 2P-p02 |
Largely Expanded Sintering Conditions Achieved by Cl-addition to Fluorine-Free MOD Processed YBCO Films
Motoki Takanori, Ikeda Shuhei (Aoyama-Gakuin Univ.); Honda Genki, Nagaishi Tatsuoki (Sumitomo Electric Industries);
Shimoyama Jun-ichi (Aoyama-Gakuin Univ.); |
| 2P-p03 |
Investigation of the Formation Mechanism of a-axis -Oriented Grains in GdBa2Cu3Oy Coated Conductors Deposited by Pulsed Laser Deposition
TERANISHI Ryo, INOUE Kenta, KIKUYAMA Tatsuhiko, NISHIYAMA Takeshi, YAMADA Kazuhiro, KANEKO Kenji (Kyushu University)
|
| 2P-p04 |
Growth Process of YBa2Cu3Oy Coated Conductors with BaZrO3 Flux Pinning
TERANISHI Ryo, KONYA Kazuki, YAMADA Kazuhiro, KANEKO Kenji (Kyushu University); IZUMI Teruo (National Institute
of Advanced Industrial Science and Technology); AWAJI Satoshi (Tohoku University) |
| 2P-p05 |
Random Pinning Centers in SmBa2Cu3Oy Films Induced by Discontinuous BaHfO3 Nanorods Fabricated by the Low Temperature Growth Technique
TSUCHIYA Yuji, MIURA Shun, SUZUKI Keisuke, NISHIYAMA Junichi, ICHINO Yusuke (Nagoya Univ.); AWAJI Satoshi (Tohoku
Univ.); YOSHIDA Yutaka (Nagoya Univ.); |
| 2P-p06 |
Temperature Dependence of Critical Currents in REBCO Coated Conductors with Artificial Pinning Centers
MATSUMOTO KANAME (KYUSHU INSTITUTE OF TECHNOLOGY); jHA ALOK (KYUHSU INSTITUTE OF TECHNOLOGY); HORIDE TOMOYA (KYUSHU
INSTITUTE OF TECHNOLOGY) |
| 2P-p07 |
Improvement of the magnetic and transport characteristics of the HTS tape by picosecond laser exposure
Pokrovskii Sergei, Mavritskii Oleg, Egorov Andrey, Mineev Nikolay, Timofeev Alexey, Rudnev Igor (NRNU MEPHI) |
Superconducting Materials (HTS and New materials) 1
ROOM P / 13:20 - 15:00 / Nov. 9
| 2P-p08 |
Bi-axial Magnetic Alignment in RE-Ba-Cu-O Superconductors
HORII Shigeru, NISHIOKA Tomohiro, ARIMOTO Itsuki, DOI Toshiya (Kyoto Univ.); SHIMOYAMA Jun-ichi (Aoyama Gakuin
Univ.) |
| 2P-p09 |
Bulk and Thin films of Y3Ba5Cu8O18+d
Mohammadizadeh Mohammad Reza (Dept. of Physics, Univerity of Tehran, Iran) |
| 2P-p10 |
Fabrication of high Tc-NdBa2Cu3Oy film via phase transformation
from stoichiometric NdBa2Cu4O8 film
FUNAKI Shuhei, MIYACHI Yugo, SOEDA Keisuke, YAMADA Yasuji (Shimane Univ. ) |
| 2P-p11 |
Compositional study on (Cu,Mo)(Sr,Ba)2YCu2Oz and (Nb,Cu)Sr2GdCu2Oz
AKESAKA Takashi, OKAZAKI Takanori, MITANI Tatsuya, MAEDA Toshihiko (Kochi University of Technology) |
| 2P-p12 |
Preparation of Te substituted FeSe Thick-film Superconductors by Electrodeposition
WATANABE NOBUAKI (Kanto Gakuin Univ.); MASUI TAKAHIKO (Kinki Univ.); OSAFUNE TAKAHIRO, KASAI YUUSUKE, KIUCHI KOUHEI,
KOIKE SHOMA (Kanto Gakuin Univ.); |
| 2P-p13 |
Study of superconducting gap in Iron Pnictide Superconductors
SAHOO BASANTA KUMAR (GOVT.COLLEGE(AUTO)ANGUL,UTKAL UNIVERSITY, VANIVIHAR,ODISHA,INDIA); |
Magnetization of Superconducting Bulk
ROOM P / 13:20 - 15:00 / Nov. 9
| 2P-p14 |
New reinforcement method for QMG® bulk magnets in high field applications
MORITA Mitsuru, TESHIMA Hidekazu, NARIKI Shinya (NSSMC) |
| 2P-p15 |
Simulation Studies of Mechanical Stress in REBaCuO Superconducting Bulk Ring with Finite Thickness during Field Cooled
Magnetization
FUJISHIRO Hiroyuki (Iwate University); AINSLIE Mark (University of Cambridge); NAITO Tomoyuki (Iwate University);
YANAGI Youske, ITOH Yoshitaka (IMRA Material R&D Co., Ltd); NAKAMURA Takashi (RIKEN) |
| 2P-p16 |
Trapped field properties of a RE-Ba-Cu-O bulk using pulsed field magnetization with a split coil with iron yokes of
various geometries and magneic properties
TAKAHASHI Keita (Iwate University (Iwate Univ.)); AINSLIE Mark (Universty of Cambridge (Univ of Cambridge)); FUJISHIRO
Hiroyuki (Iwate University (Iwate Univ.)); YUNHUA Shi (Universty of Cambridge (Univ of Cambridge)); NAITO Tomoyuki
(Iwate University (Iwate Univ.)); |
| 2P-p17 |
Evaluation of trapped field characteristics in a desktop-type superconducting bulk magnet using a large bulk material
YOKOYAMA Kazuya, ERANDA Kulawansha, ZHAO Yuanding, KATSUKI Atsushi, MIURA Atsuro (Ashikaga Institute of Technology);
OKA Tetsuo (Niigata University) |
| 2P-p18 |
Relationship between trapped field performance and the number of artificial defects in a holed superconducting bulk
magnet
ERANDA Kulawansha, ZHAO Yuanding, KATSUKI Atsushi, MIURA Atsuro, YOKOYAMA Kazuya (Ashikaga Institute of Technology);
OKA Tetsuo (Niigata University) |
| 2P-p19 |
Evaluation of trapped field performance by multi-pulsed field magnetization on a desktop type superconducting bulk
magnet
ZHAO Yuanding, ERANDA Kulawansha, KATSUKI Atsushi, MIURA Atsuro, YOKOYAMA Kazuya (Ashikaga Institute of Technology);
OKA Tetsuo (Niigata University) |
| 2P-p20 |
Magnetizing performance evaluation of a superconducting bulk magnet activated by an iterative pulsed field magnetization
KATSUKI Atsushi, ERANDA Kulawansha, ZHAO Yuanding, MIURA Atsuro, YOKOYAMA Kazuya (Ashikaga Institute of Technology);
OKA Tetsuo (Niigata University) |
Heat Transfer
ROOM P / 13:20 - 15:00 / Nov. 9
| 2P-p21 |
GPU Accelerated Numerical Investigation on Natural Convection along a Vertical Cylinder in a Supercritical Helium
OKAMURA Takahiro (KEK) |
| 2P-p22 |
The first results of He II boiling visualization experiment conducted under 4.7 seconds microgravity conditions
TAKADA Suguru (National Institute for Fusion Science); KIMURA Nobuhiro (High Energy Accelerator Research Organization);
PIETROWICZ Slawomir, GRUNT Krzysztof (Wrocław University of Science and Technology) |
| 2P-p23 |
Mechanism of heat transfer limit in cryogenic thermo-syphon
AMANO Tatsuma, OKAMURA Tetsuji (Tokyo Institute of Technology); |
| 2P-p24 |
Heat transfer characteristics in a thermosiphon heat switch
Matsumoto Takuya, Miki Takashi (KOBE STEEL, LTD.); |
Material Properties for Cooling Devices
ROOM P / 13:20 - 15:00 / Nov. 9
| 2P-p25 |
Regenerator material for GM refrigerator - Thermal properties of silver oxide
EGUCHI Tomoko, ENDO Masaki,
SAITO Akiko (Toshiba Corporation) |
| 2P-p26 |
Cooling performance of multiple Mn alloys packed bed in magnetic refrigerator
OKUBO Tatsuya, OKAMURA Tetsuji (Tokyo institute of technology); HIRANO Naoki (Chubu Electric Power CO. Inc); BAE
Sangchul (Sanden Advanced Technology Corporation); |
| 2P-p27 |
Thermal and Magnetic Properties of Regenerator Material Gd2O2S
MATSUMOTO Koichi (Kanazawa University); Numazawa Takenori (NIMS); URA Yutaro, UJIYAMA Takashi, ABE Satoshi (Kanazawa
University) |
| 2P-p28 |
Magnetocaloric Effect, Thermal conductivity, and Magnetostriction of Epoxy-bonded La(Fe0.88Si0.12S)13 hydrides
MATSUMOTO Koichi, MURAYAMA Daiki, TAKESHITA Misato, URA Yutaro, ABE Satoshi (Kanaazawa University); NUMAZAWA Takenori
(NIMS); TAKATA Hiroaki, MATSUMOTO Yoshitomo, KURIIWA Takahiro (Santoku Corp.) |
| 2P-p29 |
Size effect in the thermal conductivity of high purity aluminium
NAGATA Akira, KUBO Yuki, SUYASU Yuko, HOSHIKAWA Hiroaki (SUMITOMO CHEMICAL. Co. Ltd.); TOMARU Takayuki (High Energy
Accelerator Research Organization (KEK)); |
| 2P-p30 |
Measurement of Absolute Seebeck coefficient up to 100 K using High-Tc Bi2Sr2CaCu2O8+δ Superconductor Reference
Amagai Yasutaka, Shimazaki Takeshi (National Institute of Advanced Industrial Science and Technology (AIST));
Kawae Tatsuya (Kyusyu University (Kyusyu Univ)); Fujiki Hirroyuki, Yamamoto Atsushi, Kaneko Nohu-hisa (National Institute
of Advanced Industrial Science and Technology (AIST)); |
| 2P-p31 |
Development of a Cryostat for High-Precision Seebeck Coefficient Measurement
SHIMAZAKI Takeshi, AMAGAI Yasutaka (AIST); KAWAE Tatsuya (Kyushu Univ.); HUJIKI Hiroyuki (AIST) |
| 2P-p32 |
Individual difference performance evaluation of external-heating-type MgB2 long level sensor for liquid
hydrogen under horizontal vibration
HAMAURA Takaaki, MAEKAWA Kazuma, SUZUKI Kohei, TAKEDA Minoru (Kobe Univ); MATSUNO Yu, FUJIKAWA Shizuichi (Iwatani
Corp); KUMAKURA Hiroaki (NIMS) |
| 2P-p33 |
Effects of hydrogen and deuterium in vanadium nanoconstrictions
ISLAM Md. Saiful, UENO Yusuke, TAKATA Hiroki, INAGAKI Yuji (Department of Applied Quantum Physics, Kyushu University,
Japan); HASHIZUME Kenichi (Department of Engineering Science, Kyushu University, Japan); KAWAE Tastuya (Department
of Applied Quantum Physics, Kyushu University, Japan); |
Cryogenic Structual and Insulation Materials 1
ROOM P / 13:20 - 15:00 / Nov. 9
| 2P-p34 |
Irradiation Effect of the Insulating Materials for Fusion Superconducting Magnets at Cryogenic Temperature
KOBAYASHI Koji, AKIYAMA Yoko, NISHIJIMA Shigehiro (Osaka University) |
| 2P-p35 |
Mechanical properties of LaFe11.5Si1.5/Cu negative thermal expansion compounds and its application
as clamp materials for tensile test at cryogenic temperature
Shan Yi (TIPC, UCAS); Huang Rongjin (TIPC); Zhao Yuqiang (TIPC, UCAS); Huang Chuanjun, Li Laifeng (TIPC) |
| 2P-p36 |
Measurements of fracture toughness and fatigue crack growth rate at low temperatures
HUANG CHUANJUN, LI SHANFENG, WANG SHUYI, ZHANG ZHENG, WU ZHIXIONG, HUANG RONGJIN,
LI LAIFENG (TIPC) |
| 2P-p37 |
Mechanical Properties and fractography of Alloy A286 Forging at Cryogenic Temperatures
ONO Yoshinori, YURI Tetsumi, KOMATSU Masayuki, OGATA Toshio (NIMS); TAKEGOSHI Masao (JAXA) |
| 2P-p38 |
The effects of microstructure of Ti-6Al-4V alloy forging on fracture toughness at cryogenic temperatures
YURI Tetsumi, ONO Yoshinori, OGATA Toshio (National Institute for Materials Science); SUNAKAWA Hideo (Japan Aerospace
Exploration Agency) |
Stability 2
ROOM P / 13:20 - 15:00 / Nov. 9
| 2P-p39 |
Stable Characteristic of Conduction-cooled Superconducting Magnet by a GM Cryocooler
Zhang Hengcheng (TIPC,UCAS); Liu Huiming, Xu Dong, Han Yemao (TIPC); Shen Fuzhi (TIPC,UCAS); Huang Rongjin (TIPC);
Li Laifeng (TIPC,UCAS) |
| 2P-p40 |
Quench protection of HTS coil composed of multiple pancake-coils by changing current distribution in pancake-coils
MATSUO Ryuta, KOJIMA Akane, ARIYAMA Takahiro, MATSUDA Naohiro, TAKAO Tomoaki, TSUKAMOTO Osami (Sophia University); |
| 2P-p41 |
Measurements of Normal Zone Propagation Velocity of Conduction-Cooled REBCO Coated Conductors in Normal Magnetic Fields
ITO Tatsuya, NAKAMURA Taketsune, AMEMIYA Naoyuki (Kyoto University) |
| 2P-p42 |
Study on the Influence of Eddy-current Heating due to Excitation/De-excitation on HTS Coil
KASAMATSU Yoko (Tokyo Institute of Technology); MIZUNO Katsutoshi (Railway Technical Research Institute); OKAMURA
Tetsuji (Tokyo Institute of Technology); |
| 2P-p43 |
Three-Dimensional Numerical Simulation of a D-type HTS Coil
Wang Zhuang, Tang Yuejin, Ren Li, Xu Ying (State Key Laboratory of Advanced Electromagnetic Engineering and Technology,
Huazhong University of Science and Technology, Wuhan, China) |
| 2P-p44 |
Degradation of a REBCO conductor due to the combined effect of edgewise bend and tensile stress
KAJITA KENTARO, TAKAO TOMOAKI (Sophia University); YANAGISAWA YOSHINORI, MAEDA HIDEAKI (RIKEN) |
| 2P-p45 |
Mechanical Stress Evaluation in BSCCO Superconducting Wires Using Acoustic Emission
SAKAKURA Ryo, NINOMIYA Akira, NOMURA Shinichi (MEIJI UNIVERSITY); |
| 2P-p46 |
Evaluation of Quench Tolerance of the Superconducting Magnet using 3-point Bending Test Stand
AOKI Manabu, NAKAGAWA Ryoji, MIYAZOE Akihisa, ANDO Ryuuya (Hitachi); IIO Masami, SASAKI Ken-ichi (KEK) |
MRIs
ROOM P / 13:20 - 15:00 / Nov. 9
| 2P-p47 |
Progress Report on Development of 0.5-T/300-mm MgB2 MRI Magnet
Kim Young-Gyun, Choi Yoon Hyuck, Yang Dong Gyu (Department of Materials Science and Engineering, Korea University);
Kim Jiman, Han Junho, Han Sangduk (Kiswire Advanced Technology Co., Ltd); Lee Haigun (Department of Materials Science
and Engineering, Korea University) |
| 2P-p48 |
Current sharing properties in parallel conductors composed of REBCO superconducting tapes for MRI
HONDA Shotaro, FUKUMOTO Yusuke, IWAKUMA Masataka, YOSHIDA Koichi, SATO Seiki (Kyushu-UNIV); IZUMI Teruo (AIST);
TOMIOKA Akira, KONNO Masayuki (Fujielectric) |
| 2P-p49 |
Improvement of Magnetic Field Stability of HTS-MRI Magnet by Introducing High Stabilized Power Supply
Yachida Takayuki, Kawashima Takeshi, Shirai Yasuyuki (Kyoto University); Matsuda Tetsuya, Yokoyama Shoichi (Mitsubishi
Electric Corporation) |
| 2P-p50 |
Protection for Meter-Class No-Insulation REBCO Pancake Coil using a Parallel Resistance during a Discharging
Wang Tao (Waseda University); Ishiyama Atsushi (Wasoeda Universitya); Noguchi So (Hokkaido University); Hahn Seungyong
(The National High Magnetic Field Laboratory, U.S); Iwasa Yukikazu (Massachusetts Institute of Technology); |
| 2P-p51 |
Reduction method of Irregular Magnetic Field Distribution Generated by Screening Currents in Multiple REBCO Coils
OZONE Yuichi, NAKAZONO Kohei, Wang Tao, ISHIYAMA Atsushi (Waseda University); UEDA Hiroshi (Okayama University);
NOGUCHI So (Hokkaido University); MIYAZAKI Hiroshi, TOSAKA Taizo, NOMURA Shunji, KURUSU Tsutomu (Toshiba) |
Magnetic Separation
ROOM P / 13:20 - 15:00 / Nov. 9
| 2P-p52 |
Magnetic Separation Using HTS Bulk Magnet for Cs-Bearing Fe precipitates
OKA Tetsuo, ICHIJU Kana, SASAKI Sho, OGAWA Jun, FUKUI Satoshi, SATO Takao, OOIZUMI Manabu (Niigata University);
YOKOYAMA Kazuya (Ashikaga Inst. Tec.); AOKI Shigeyuki, OONISHI Noriyuki (JNC) |
| 2P-p53 |
Removal of Iron Oxide Scale from Feed-water in Thermal Power Plant by Using Magnetic Separation
NAKANISHI Motohiro, SHIBATANI Saori, AKIYAMA Yoko, NISHIJIMA Shigehiro (Osaka Univ.); MISHIMA Fumihito (Fukui
Univ. of Technology) |
| 2P-p54 |
Development of a magnetic separation system for boiler feed water scale in thermal power plants
OKADA Hidehiko, HIROTA Noriyuki (Natonal Institute for Materials Science); SHIBATANI Saori, MIZUNO Nobumi, NAKANISHI
Motohiro, AKIYAMA Yoko, NISHIJIMA Shigehiro (Osaka Univ.); MISHIMA Fumihito (Fukui Univ. of Tech.); MATUURA Hideki,
NAMBA Seitoku (Shikoku Research Institute Inc.) |
Cables 1
ROOM P / 13:20 - 15:00 / Nov. 9
| 2P-p55 |
Basic study on Ground Fault Characteristics of 66kV HTS Cable
Minamino tadahiko, Morimura Toshiya, Takato Masuda (Sumitomo Electric Industries, LTD.); Tetsutaro Nakano, Masahiro
Serizawa, Tomoo Mimura (Tokyo Electric Power Company Holdings, Inc.) |
| 2P-p56 |
Transient Temperature and Pressure Simulation of a 66 kV 40 m HTS Power Cable System with a Fault Current Compared
with Experimental Results
TAKEDA Natsuko, YASUI Tetsuo, Yokoo Yusuke, Agatsuma Koh, Ishiyama Atsushi (Waseda University); Wang Xudong (High
Energy Accelerator Research Organization); Masuda Takato, Morimura Toshiya (Sumitomo Electric Industries); Mimura
Tomoo (Tokyo Electric Power Company) |
| 2P-p57 |
Transient Simulation of a 3 km HTS Power Cable with a Fault Current for 66 kV-class Transmission Lines
YASUI Tetsuo, TAKEDA Natsuko, YOKOO Yusuke, AGATSUMA Koh, ISHIYAMA Atsushi (WASEDA University); WANG Xudong (High
Energy Accelerator Research Organization); MASUDA Takato, MORIMURA Toshiya (Sumitomo Electric Industries Ltd.); MIMURA
Tomoo (Tokyo Electric Power Company) |
| 2P-p58 |
Temperature and Pressure Simulations of 275kV 20m HTS Power Model Cable System with Fault Current
YOKOO Yusuke, YASUI Tetsuo, TAKEDA Natsuko, AGATSUMA Koh, ISHIYAMA Atsushi (Waseda University); WANG Xudong (High
Energy Accelerator Research Organization); TAKAGI Tomohiro, YAGI Masashi (Furukawa Electric) |
| 2P-p59 |
Current loading tests of 500m-length high-temperature superconducting DC cable system
CHIKUMOTO Noriko, WATANABE Hirofumi, IVANOV Yury, TAKANO Hirohisa (Chubu Univ.); YAMAGUCHI Satarou (Chubu Univ);
ISHIYAMA Kotaro, OISHI Zenji (Chiyoda Corp.); WATANABE Michihiko, MASUDA Takato (Sumitomo Electric Ind. ); SAWAMURA
Toru (Sakura Internet) |
| 2P-p60 |
Withdrawn
|
| 2P-p61 |
Impact Analysis of Introducing Superconducting Cables to DC Railway Feeding Systems
AKAHORI Takahiro, TERAO Yutaka, OHSAKI Hiroyuki (University of Tokyo); TOMITA Masaru (Railway Technical Research
Institute) |
| 2P-p62 |
Influence of winding direction of multilayer coaxial HTS cable on the critical current and AC losses
Vyatkin Vladimir (Chubu University, Japan); Kashiwagi Kei (Kyushu Institute of Technology, Japan); Sun Jian, Ivanov
Yury (Chubu University, Japan); Otabe Edmund (Kyushu Institute of Technology, Japan); Yamaguchi Satarou (Chubu University,
Japan) |
Magnet Technology 1
ROOM A / 15:20 - 18:00 / Nov. 9
| 2A-p01 |
Invited An overview of the development of super-high field NMR magnets in
Japan
MAEDA Hideaki, YAMAZAKI Toshio (RIKEN); NISHIYAMA Yusuke (JEOL RESONANCE Inc.); HAMADA Mamoru (JASTEC Inc.); HASHI
Kenjiro, MATSUMOTO Shinji, NISHIJIMA Gen, SHIMIZU Tadashi (NIMS); SUEMATSU Hiroto (JEOL RESONANCE Inc.); YANAGISAWA
Yoshinori, TAKAHASHI Masato (RIKEN); NOGUCHI Takashi (NIMS); SAITO Kazuyoshi (Kobe Steel Ltd.) |
| 2A-p02 |
Mechanical Vibration Test of a Prototype REBCO Coil
MIZUNO Katsutoshi, TANAKA Minoru, OGATA Masafumi (Railway Technical Research Institute); KASAMATSU Yoko, OKAMURA
Tetsuji (Tokyo Institute of Technology) |
| 2A-p03 |
Theoretical Investigation on the Current Decay in Closed-Loop High-Temperature Superconducting Coils with Joints
MAWATARI Yasunori (AIST) |
| 2A-p04 |
Overview of the Present Progresses and Activities on the Superconducting magnet system of Chinese Fusion Engineering
Test Reactor
ZHENG JINXING, SONG YUNTAO, LIU HUAJUN, LI JIANGANG, LIU XUFENG, XU WEIWEI, KANG RUI (Institute of Plasma Physics,
Chinese Academy of Sciences) |
| 2A-p05 |
Configuration Optimization of High Field Magnets for Testing Coil-shaped High-current Conductors
IMAGAWA Shinsaku, OBANA Tetsuhiro, MITO Toshiyuki (NIFS) |
| 2A-p06 |
Calculated and Measured Shielding-Current-Induced Fields of Pancake Coils Wound with Striated Coated Conductors Exposed
to Normal Magnetic Fields
TOMINAGA Naoki, SOGABE Yusuke, AMEMIYA Naoyuki (Kyoto University); YAMANO Satoshi, SAKAMOTO Hisaki (Furukawa Electric
Co., Ltd.) |
| 2A-p07 |
Electromagnetic Analysis on Screening Current Distribution in REBCO Coil
UEDA Hiroshi, KOIZUMI Tomoaki, KIM SeokBeom (Okayama University); NOGUCHI So (Hokkaido University); ISHIYAMA Atsushi
(Waseda University) |
Cables 2
ROOM B / 15:20 - 17:40 / Nov. 9
| 2B-p01 |
Invited Recent Progress of AC HTS Cable Development in Japan
Mimura Tomoo, Honjo Shoichi (Tokyo Electric Power Company Holdings, Inc) |
| 2B-p02 |
Invited Ishikari Project for A Longer Superconducting DC Cable System
YAMAGUCHI Satarou, IVANOV Yury, WATANABE Hirofumi (Chubu University); CHIKUMOTO Noriko (Chubu Univeristy); KOSHIDUKA
Hiromi (Chiyoda Corp.); HAYASHI Kazuhiko (Sumitomo Electric); SAWAMURA Toru (Sakura Internet) |
| 2B-p03 |
Experiments on A New Superconducting Bus-bar for Aviation
SUN Jian, IWATA Yosuke, YAMAGUCHI Satarou (Chubu Univ); KOJIMA Takayuki, OKAI Keiichi, KOBAYASHI Hiroaki, TAGUCHI
Hideyuki (JAXA); |
| 2B-p04 |
A Short Circuit Current Test through a 66kV HTS Cable System
Toshiya Morimura, Tadahiko Minamino, Takato Masuda (Sumitomo Electric Industries, Ltd.); Tetsuo Yasui, Koh Agatsuma,
Atsushi Ishiyama (Waseda University); Tetsutaro Nakano, Masahiro Serizawa, Tomoo Mimura (Tokyo Electric Power Company
Holdings, Inc.) |
| 2B-p05 |
Invited Electrical measurement of ac loss in triaxial superconducting cables
IWAKUMA Masataka, TOKUCHI Takayuki (Kyushu University); KAWAGOE Akifumi, ISHIBASHI Yuto, Inoue Kyosuke (Kagoshima
University); ADACHI Kazuhisa, MIDO Nobuhiro, KITAMURA Tasuku, SHIOHARA Kei, KOIZUMI Tsutomu, HASEGAWA Takayo (SWCC
Showa Cable Systems Co., Ltd.) |
| 2B-p06 |
Invited Study on AC loss measurements of HTS power cable for standardizing
Mukoyama Shinichi (Furukawa Electric); Amemiya Naoyuki (Kyoto University); Watanabe Kazuo, Iijima Yasuhiro (Fujikura);
Mido Nobuhiro (Showa Cable); Masuda Takao, Morimura ToToshiya, Oya Masayoshi (Sumitomo Electric); Nakano Tetsutaro
(Tokyo Electric Power Company); Yamamoto Kiyoshi (JCMA) |
Superconducting Materials (HTS and New materials) 2
ROOM C / 15:20 - 18:00 / Nov. 9
| 2C-p01 |
Invited Beyond the Doped-Mott-Insulator Scenario for High-Tc Superconductivity in Cuprates
NAITO Michio (Tokyo University of Agriculture and Technology) |
| 2C-p02 |
Invited Thin-film growth and electric double-layer transistors of iron-based
superconductors
HIRAMATSU Hidenori, HOSONO Hideo (Tokyo Institute of Technology) |
| 2C-p03 |
Invited Development of new superconductors in iron-based and related materials
KUDO Kazutaka (RIIS, Okayama University) |
| 2C-p04 |
Invited Development of High Pressure Cell for Exploration of New Superconductors
TAKANO Yoshihiko (National Institute for Materials Science (NIMS-MANA)) |
| 2C-p05 |
Invited Recent Discovery of New Superconductors in AIST
IYO Akira, ISHIDA Shigeyuki, EISAKI Hiroshi, FUJIHISA Hiroshi, GOTOH Yoshito, OKA Kunihiko, KIHOU Kunihiro, TAKESHITA
Nao, HASE Izumi, YANAGISAWA Takashi, YOSHIDA Yoshiyuki (AIST); KINJO Tatsuya, NISHIO Taichiro, HIRA Koudai, TOKIWA
Kazuyasu (Tokyo Univ. of Science); KAWASHIMA Kenji, YANAGI Yousuke (IMRA Material R&D Co., Ltd.) |
| 2C-p06 |
Invited Recent progress in spark plasma sintered MgB2
Badica Petre (National Institute of Materials Physics (NIMP)) |
| 2C-p07 |
Moved to 3P-p58
|
Cryogenic Structural and Insulation Materials 2
ROOM D / 15:20 - 18:00 / Nov. 9
| 2D-p01 |
Invited Low-Temperature Creep of Austenitic Stainless Steels
Reed Richard (Cryogenic Materials, Inc.); Walsh Robert (National High Magnetic Field Laboratory) |
| 2D-p02 |
Invited Axial Fatigue Life of Three Austenitic Steels at 4 K
Walsh Robert, McRae Dustin, Toplosky Vince, Balachandran Shreyas (National High Magnetic Field Laboratory) |
| 2D-p03 |
Invited Development of Cryogenic Structural Materials for ITER Magnet Structures
in Japan
IGUCHI Masahide, SAKURAI Takeru, NAKAHIRA Masataka, KOIZUMI Norikiyo, NAKAJIMA Hideo (QST) |
| 2D-p04 |
Invited Evolution of Microstructure and Mechanical Properties in Ultrafine-Grained
Copper Tested at Low Temperatures
Sas Jan, Weiss Klaus-Peter, Kauffmann-Weiss Sandra (Karlsruhe Institute of Technology (KIT), Institute for Technical
Physics (ITEP), Germany); Kauffmann Alexander (Karlsruhe Institute of Technology (KIT), Institute for Applied Materials
(IAM-WK), Germany); Kvackaj Tibor (Technical University of Kosice (TUKE), Institute of Materials (IMAC), Slovakia)
|
| 2D-p05 |
Invited Influence of high pressure hydrogen gas and liquid on tensile properties
of stainless steels at cryogenic temperature
OGATA Toshio (National Institute for Materials Science) |
| 2D-p06 |
Invited Properties of Radiation Stable Insulation Composites for High Field
Fusion Magnet
WU Zhixiong, HUANG Rongjin, HUANG Chuanjun,
LI Laifeng (TIPC of CAS, China) |
Banquet (KKR Hotel Kanazawa)
19:00 - 21:00 / Nov. 9
Plenary Talk 3
ROOM A / 8:20 - 9:40 / Nov. 9
| PL-4 |
Application Driven Superconducting Wire and Cable Development and Application Activities and Prospects in Europe
GOLDACKER Wilfried (Karlsruhe Institute of Technology, Germany) |
| PL-5 |
Application Driven Superconducting Wires Development and Future Prospects in US
LI Qiang (Brookhaven National Laboratory, USA) |
Wires and Tapes (HTS) 3
ROOM P / 10:00 - 11:40 / Nov. 10
| 3P-p01 |
Analytical expression of local I -V characteristics for long length REBCO coated conductors under the
local Ic fluctuation
SUZUKI Takumi, FUKUZAKI Takahiro, HIGASHIKAWA Kohei, INOUE Masayoshi, KISS Takanobu (Kyushu university) |
| 3P-p02 |
Critical-current measurement of commercial REBCO conductors at 4.2 K
TSUCHIYA Kiyosumi (KEK); KIKUCHI Akihiro (NIMS); TERASHIMA Akio (KEK);
NORIMOTO Kazuki, UCHIDA Mio (Sophia Univ.); TAWADA Masafumi, MASUZAWA Mika, OHUCHI Norihito, WANG Xudong (KEK);
IIJIMA Yasuo (NIMS); TAKAO Tomoaki (Sophia Univ.); FUJITA Shinji, DAIBO Masanori, IIJIMA Yasuhiro (Fujikura Ltd.)
|
| 3P-p03 |
Analysis on the transport current properties for the superconducting wire under the spray cooling
Du HoIk, JEONG HyunGi, YANG SungChae (Chonbuk National University) |
| 3P-p04 |
Measurement and analysis of in-field critical currents in EuBCO coated conductor under the influence of flux creep
ONODERA Yuta, IMAMURA Kazutaka, SUZUKI Takumi, HIGASHIKAWA Kohei, INOUE Masayoshi (Kyushu Univ.); YOSHIDA Tomo
(Fujikura Ltd.); IBI Akira, MACHI Takato, IZUMI Teruo (AIST); KISS Takanobu (Kyushu Univ.) |
| 3P-p05 |
Improvement of uniformity of filamentary Ic on scribed coated conductors
Machi Takato, Ibi Akira, Izumi Teruo (AIST) |
| 3P-p06 |
In-Field Characterization of Positional Variation of Critical Current in RE-123 Coated Conductors by Use of Reel-to-reel
Magnetic Measurement System
FUKUZAKI Takahiro, HIGASHIKAWA Kohei, IMAMURA Kazutaka, INOUE Masayoshi (Kyushu Univ.); IGARASHI Mitsunori, KAKIMOTO
kazuomi, IIJIMA Yasuhiro (Fujikura); IZUMI Teruo (AIST); KISS Takanobu (Kyushu Univ.); |
| 3P-p07 |
Study on the pinning centers in Sm1+x Ba2Cu3+yO7-d Coated Conductor by
Reactive Co-evaporation Method
Kim Gwan tae (Korea Superconductivity Research Center, Korea Electrotechnology Research Institute, Changwon, Korea
); Kim Ho-Sup, Ha Dong-Woo (Korea Superconductivity Research Center, Korea Electrotechnology Research Institute, Changwon,
Korea) |
| 3P-p08 |
Magnetization loss comparison between Bi2223/Ag and YBCO tape exposed to a magnetic field in multiple directions
Ogawa Jun, Fukui Satoshi, Oka Tetsuo, Iwashita Ryousuke, Kinebuchi Shuzo, Yan Panpan (Niigata University); |
| 3P-p09 |
AC loss properties of stacked REBCO superconducting tapes
ITO Tetsuya, UENO Tatsuhito, IWAKUMA Masataka (Kyushu Univ.); MACHI Takato, IBI Akira, IZUMI Teruo (AIST); |
Fabrication and Application of Superconducting Bulk
ROOM P / 10:00 - 11:40 / Nov. 10
| 3P-p10 |
Withdrawn
|
| 3P-p11 |
A comparative study of Ge-based organometallics additions to MgB2
Batalu Dan (UPB); Nakamura Takashi (Asai Germanium Research Institute); Aldica Gheorghe, Badica Petre (INCDFM); |
| 3P-p12 |
Withdrawn
|
| 3P-p13 |
Withdrawn
|
| 3P-p14 |
Bulk high-temperature superconducting hollow cylinders used for magnetic shielding: enhancement of the shielded volume
and effect of an initial trapped field
WERA Laurent, FAGNARD Jean-Francois, HOGAN Kevin, VANDERHEYDEN Benoit, VANDERBEMDEN Philippe (University of Liege
(ULg)) |
| 3P-p15 |
Fabrication of human levitation system - A.I.T. hoverboard -
MIURA Atsuro, YAMAGATA Shingo, KATSUKI Atsushi, ERANDA Kulawansha, ZHAO Yuanding, YOKOYAMA Kazuya (Ashikaga Institute
of Technology) |
Superconducting Joints 1
ROOM P / 10:00 - 11:40 / Nov. 10
| 3P-p16 |
Joint of REBa2Cu3Oy Coated Conductors Using Metal Organic Deposition Process
TERANISHI Ryo, HIRAMATSU Kazuya, SATO Yukio, KANEKO Kenji (Kyushu University) |
| 3P-p17 |
Fabrication of Large-Bore Seamless Loop Targeting Magnetic Flux Transformer Using Cut-and-Wind Method on HTS Coated
Conductor
KOMORI Kazunori (National Institute for Materials Science, Kanazawa Institute of Technology); ARISAWA Shun-ichi
(National Institute for Materials Science); ENDO Kazuhiro (Kanazawa Institute of Technology); |
LTS Strands
ROOM P / 10:00 - 11:40 / Nov. 10
| 3P-p18 |
Tensile Strain dependence of Superconducting properties for PIT processed V3Ga wire
OGURO Hidetoshi (Tokai Univ.); HISHINUMA Yoshimitsu (NIFS); AWAJI Satoshi (Tohoku Univ.); KIKUCHI Akihiro (NIMS); |
| 3P-p19 |
Study for the drawing properties of superconducting wire with the lower Cu/Sc ratio
Kim Hyosung, Shin Iksang, Na shinhye, Hwang Duckyoung (Kiswire Advanced Technology); |
| 3P-p20 |
Mechanical properties of bronze-processed Nb3Sn multifilamentary wires using various Cu-Sn-Zn alloy matrices
HISHINUMA Yoshimitsu (National Institute for Fusion Science); OGURO Hidetoshi (Tokai University); TANIGUCHI Hiroyasu
(Osaka Alloying Works); KIKUCHI Akihiro (National Institute for Materials Science); |
| 3P-p21 |
Cyclic Loading Test of Pre-bent Cu-Nb/Nb3Sn Wires in Liquid Helium
EBARA Yuta, TSURUDOME Takehisa (Sumitomo Heavy Industries, Ltd.); OGURO Hidetoshi (Department of Materials Science,
Tokai University); AWAJI Satoshi, WATANABE Kazuo (Institute for Materials Research, Tohoku University) |
| 3P-p22 |
Effect of dies design on the drawing process of Cu channel for WIC NbTi SC wire
Lee KwangJin, Kim Juhong, Jang SeHoon, You HeonHyung, Hwang DuckYoung (KAT Ltd.); |
| 3P-p23 |
Nb3Al Superconducting Wires with Alloyed-Interfilament Matrix
KIKUCHI Akihiro, IIJIMA Yasuo, HIRATA Kazuto (NIMS); TSUCHIYA Kiyosumi (KEK) |
| 3P-p24 |
Investigation of the Pulsed DC Joule Heating and Inert Gas Jet Cooling for Nb3Al Superconducting Wire Fabrications
IIJIMA Yasuo,
KIKUCHI Akihiro (NIMS) |
Cryogenic Materials
ROOM P / 10:00 - 11:40 / Nov. 10
| 3P-p25 |
A.C. breakdown voltage of ice electret
Oshika Yoshiko,
Tsuchiya Yudai (Meijo University); Okumura Takamasa (Iwate University); Muramoto Yuji (Meijo University) |
| 3P-p26 |
Delicacy of pinning effect in rectangular array of antidots on superconducting film
Muhammad Kamran, Syed Rameez, Haider Sajjad Ali, Akram Tallah (Department of Electrical Engineering, COMSATS Institute
of IT, Wah Cantt, Pakistan); Kun Heshi (IoP, CAS, and Beijing National Laboratory of Condensed Matter Physics, Beijing,
China);
|
| 3P-p27 |
Low-temperature negative thermal expansion property of Mn doped cubic NaZn13-type La(Fe, Al)13 compounds
Zhao Yuqiang (TIPC, UCAS); Huang Rongjin (TIPC); Shan Yi (TIPC, UCAS); Wang Wei, Li Jiangtao, Li Laifeng (TIPC)
|
| 3P-p28 |
Near-Zero Thermal Expansion in Ti Alloys at Cryogenic Temperature
Wang Wei (TJU, TIPC);
Huang Rongjin, Huang Chuanjun (TIPC); Zhao Yuqiang (TIPC, UCAS); Li Laifeng (TIPC) |
Magnet Design
ROOM P / 10:00 - 11:40 / Nov. 10
| 3P-p29 |
Withdrawn
|
| 3P-p30 |
A novel gas-gap thermal switch for conduction-cooled cryogenic system
Li Monan,
Xu Dong, Liu Huiming, Li Laifeng (State Key Laboratory of Technologies in Space Cryogenic Propellants, Technical
Institute of Physics and Chemistry,Chinese Academy of Sciences) |
| 3P-p31 |
Design and fabrication of a conduction-cooled large bore superconducting magnet
Liu Huiming, Xu Dong, Shen Fuzhi, Zhang Hengcheng, Li Laifeng (Technical Institute of Physics and Chemistry,CAS)
|
| 3P-p32 |
Design Optimization for Superconducting Bending Magnets using Pareto Front Curve
MURATA Yukihiro, ABE Mitsushi, ANDO Ryuya (Hitachi, Ltd. Research&Development Group) |
| 3P-p33 |
Manufacture of 13T Superconducting Magnet with 700 mm Bore for NIFS Superconducting Magnet Facility
Horikoshi Atsushi, Kido Shuichi, Suzuki Kunihiko, Yamauchi Tsunehiko, Hagiwara Yoshiaki, Takimoto Yoshihiro, Kuchiishi
Yoshikazu, Shiga Kazumi (Hitachi, Ltd. Hitachi Works); Wakuda Tsuyoshi, Murata Yukihiro (Hitachi, Ltd. Research and
Development Group); Imagawa Shinsaku, Obana Tetsuhiro, Takada Suguru, Yanagi Nagato (National Institute for Fusion
Science) |
| 3P-p34 |
Design and Performance Test of Superconducting Transport Solenoid for D-Line at J-PARC Muon Science Facility
Tanaka Yasuyuki, Semba Tomoyuki, Nakajima Shotaro, Hagiwara Yoshiaki, Kido Shuichi (Hitachi, Ltd. Hitachi Works);
Murata Yukihiro (Hitachi, Ltd. Research and Development Group); Sasaki Ken-ichi, Shimomura Koichiro, Kawamura Naritoshi,
Strasser Patrick, Makida Yasuhiro, Ohhata Hirokatsu, Kurosawa Noriyuki, Miyake Yasuhiro (The High Energy Accelerator
Research Organization (KEK)) |
| 3P-p35 |
Critical Current Properties of the Force-Balanced Helical Coil with a Complex Stress Distribution Using High Temperature
Superconducting Tapes
KAMADA Hiroharu, NINOMIYA Akira, NOMURA Shinichi (Meiji University); YAGAI Tsuyoshi (Sophia University); NAKAMURA
Taketsune (Kyoto University); TSUTSUI Hiroaki (Tokyo Institute of Technology); CHIKARAISHI Hirotaka, YANAGI Nagato,
IMAGAWA Shinsaku (National Institute for Fusion Science); |
| 3P-p36 |
Electromagnetic Design of Metal insulated HTS quadrupole magnets of the pre-separator at RISP
Choi Jongho (Changwon National University (CWNU)); Sim Kideok (Korea Electrotechnology Research Institute (KERI));
Kim Do-Gyun (Institute for Basic Science (IBS)); Park Minwon, Yu In-Keun (Changwon National University (CWNU)); |
Fusion
ROOM P / 10:00 - 11:40 / Nov. 10
| 3P-p37 |
Experience in Vacuum-Pressure Impregnation of large scale components of ITER PF1 coil
Mednikov Andrey, Belyakov Valery, Bursikov Andrey, Klimchenko Yury, Marushin Egor, Nasluzov Sergey, Rodin Igor,
Stepanov Dmitry (The D.V. Efremov Institute (NIIEFA)); Ustinov Alexander (ITER Russia-Rederation Domestic Agency)
|
| 3P-p38 |
Evaluation of Inductive Heating Energy of ITER TF Conductor by Calorimetry
Ozeki Hidemasa, Suwa Tomone, Saito Toru, Matsui Kunihiro, Isono Takaaki, Kawano Katsumi, Takahashi Yoshikazu (QST); |
| 3P-p39 |
Results of the Testing of 68 kA HTS Current Lead Prototypes for ITER
Ding Kaizhong, Zhou Tingzhi, Liu Chenglian, Du Qingqing, Feng Hansheng, Lu Kun, Song Yuntao (Institute Plasma
Physics Chinese Academy of Sciences(ASIPP)); Yang Yifeng (Southampton University); Bauer Pierre, Lee Seungje, Arnaud
Devred, Gung Chenyu (ITER IO); Niu Erwu (ITER CNDA); Huan Quan (Institute Plasma Physics Chinese Academy of Sciences(ASIPP))
|
| 3P-p40 |
Completion of first CS module for JT-60SA and the plan of cold test
MURAKAMI Haruyuki, NATSUME Kyohei, KAMIYA Koji, TSUCHIYA Katsuhiko, KIZU Kaname, KOIDE Yoshihiko (QST); HORII
Hiroyuki, NOMOTO Kazuhiro (Mitsubishi Electric Corporation); OBANA Tetsuhiro, TAKAHATA Kazuya, HAMAGUCHI Shinji, TAKADA
Suguru, CHIKARAISHI Hirotaka, MITO Toshiyuki, IMAGAWA Shinsaku (NIFS) |
| 3P-p41 |
Commissioning of the JT-60SA helium refrigerator
KAMIYA Koji, NATSUME Kyohei, OHTSU Kiichi, OISHI Makoto, KASHIWA Yoshitoshi, KIZU Kaname, KOIDE Yoshihiko (Quantum
and Radiological Science and Technology); HOA Christine, MICHEL Frederic, ROUSSEL Pascal, LAMAISON Valerie, BONNE
Francois (CEA); DIPIETRO Enrico, CARDELLA Antonino, WANNER Manfred (Fusion 4 Energy); LEGRAND Jerome, LANGEVIN Baptiste,
PUDYS Vincent (Air Liquide Advanced Technologies) |
| 3P-p42 |
Feasible Study of Nb3Sn Strands in React and Wind CIC Conductor for Helical Winding
MATSUDA TAKANORI, YAGAI TSUYOSHI, SHOJI HAYATO, SHIMOMURA KENTARO (SOPHIA UNIVERSITY); MORITA TARO (SOPHIA UNIEVRSITY);
HAMAGUCHI SHINJI, OBANA TETSUHIRO, MITO TOSHIYUKI (NATIONAL INSTITUTE FOR FUSION SCIENCE); KAJITANI HIDEKI (NATIONAL
INSTITUTIONS FOR QUANTUM AND RADIOLOGICAL SCIENCE AND TECHNOLOGY) |
| 3P-p43 |
Conceptual design study of superconducting magnet system for fusion DEMO reactor
UTOH Hiroyasu, HIWATARI Ryoji, SAKAMOTO Yoshiteru, TOBITA Kenji, ASAKURA Nobuyuki, SOMEYA Youji, TOKUNAGA Shinsuke
(QST); NISHIMURA Arata (NIFS) |
SMESs / Combination with RE
ROOM P / 10:00 - 11:40 / Nov. 10
| 3P-p44 |
A study on the design of 1 - 100 MJ class SMES with different coil configurations
Xu Ying, Tang Yuejin, Ren Li, Zhang Zhongping, Chen Wei (Huazhong University of Science and Technology) |
| 3P-p45 |
Dynamic Performances Analysis for HTS SMES Used in Power Grid Based on a Novel Field-Circuit Coupled Method
WANG Zuoshuai, REN Li, TANG Yuejin, XU Ying, YAN Sinian (R&D Center of Applied Superconductivity; State Key
Lab. of AEET); LIU Yang (State Grid Shandong Electric Power Research Institute); DENG Xuzhi (R&D Center of Applied
Superconductivity; State Key Lab. of AEET) |
| 3P-p46 |
Compact SMES with a Superconducting Film in a Spiral Trench on a Si-Wafer Formed by MEMS Technology with Possible
High Energy Storage Volume-Density Comparable to Those of Rechargeable Batteries (IV)
IGUCHI Nobuhiro, SUZUKI Yasuhiro, ADACHI Kazuhiro, HIOKI Tatsumi, ICHIKI Akihisa, MOTOHIRO Tomoyoshi (Nagoya University);
SUGIMOTO Noriaki (TOYOTA Central R&D Labs.,Inc.); HSU Che-Wei, SATO Ryoto, KUMAGAI Shinya, SASAKI Minoru (TOYOTA
Technological Institute); NOH Joo-Hyong, SAKURAHARA Yuuske, OKABE Kyohei, TAKAI Osamu, HONMA Hideo (Kanto Gakuin University);
WATANABE Hideo, SAKODA Hitoshi, DOY Hideyuki (D-process Inc.); ZHOU Shuliang, NOZAKI Toshihiro (AISIN SEIKI Co.,Ltd.);
SASAGAWA Hiyoyuki (D-process Inc.); HORI Hironori, NISHIKAWA Shigeaki (AISIN SEIKI Co.,Ltd.); |
| 3P-p47 |
Design study of R&W MgB2 Coil for Superconducting Magnetic Energy Storage
YAGAI Tsuyoshi, OKUBO Toru, MIZUNO Shinya, ANDO Kennosuke, MIZUOCHI Sora, KAMIBAYASHI Masahiro, JINBO Mana, TAKAO
Tomoaki (Sophia University); MAKIDA Yasuhiro, SHINTOMI Takakazu (KEK); HIRANO Naoki (Chubu Electric Power Co.,Inc.);
KOMAGOME Toshihiro, TSUKADA Kenichi (Mayekawa MFG Co. Ltd); ONJI Taiki, ARAI Yuki, TOMITA Masaru (Railway Technical
Research Institute); MIYAGI Daisuke, TSUDA Makoto (Tohoku University); HAMAJIMA Takataro (Mayekawa MFG Co. Ltd) |
| 3P-p48 |
Application of SMES with Liquid Hydrogen for Efficient Use of Renewable Energy in the Energy Internet
Yang Jun,
Wang Xin, Chen Lei (Wuhan University) |
| 3P-p49 |
Hydraulic characteristics of helical-type seawater MHD power generator tested at ship model basin
TAKEUCHI Atsushi, TANAKA Soichiro, OGAWA Tomohiro, MAEKAWA Kazuma, TAKEDA Minoru (Kobe Univ); MATSUMOTO Shinji
(NIMS) |
Rotating machines 1 / Power Applications 2
ROOM P / 10:00 - 11:40 / Nov. 10
| 3P-p50 |
Drive Frequency Dependence of Regeneration Characteristics of 20 kW Class High Temperature Superconducting Induction/synchronous
Motor
Karashima Tomoharu, Nakamura Taketsune, Ikeda Kenichi, Ogasa Takuro, Nishino Ryohei, Amemiya Naoyuki (Kyoto University,
Japan); Itoh Yoshitaka (IMRA Material R&D Co., Ltd., Japan); |
| 3P-p51 |
Experimental and Analytical Studies on Transient Efficiency of 20 kW Class HTS Induction/Synchronous Motor at Starting
Mode
IKEDA Kenichi, NAKAMURA Taketsune, MURANAKA Keitaro, NISHINO Ryohei, OGASA Takuro, AMEMIYA Naoyuki (Kyoto University);
ITOH Yoshitaka (IMRA MATERIAL R&D Co., Ltd.); |
| 3P-p52 |
Study on AC Loss Reduction in HTS Coils With Iron Core by Flux Modification Using Magnetic Material in 3-phase AC
Condition
FUKUI Satoshi, OGAWA Jun,
NOHARA Kazuki, KOBU Yuta, TAKAHASHI Jun, SATO Takao (Niigata University); NAKAMURA Taketsune (Kyoto University)
|
| 3P-p53 |
Design Study of 500kW Fully Superconducting Synchronous Motor
FUKUDA Shogo, TAMURA Katsuhito, IWAKUMA Masataka, SATO Seiki, YOSHIDA Koichi (Kyushu University); HASE Yoshiji,
KONNO Masayuki (Fuji Electric); IZUMI Teruo (AIST) |
| 3P-p54 |
Electrical and structured analysis for 15MW REBCO designed wind turbine generators
YUN Kiwook, IWAKUMA Masataka, TAMURA Katsuhito (kyushu university); HASE Yoshiji, SASAMORI Yuichiro (Fuji electronics);
IZUMI Teruo (ISTEC) |
| 3P-p55 |
Influences of Cooling Yoke on Efficiencies of Fully Superconducting Synchronous Motors
Inoue Kyosuke, Kawagoe Akifumi (Kagoshima University); Iwakuma Masataka (Kyushu University); KONNO Masayuki, TOMIOKA
Akira (Fuji Electric Co.,Ltd.); HASE Yoshiji (Fuji electronics); IZUMI Teruo (AIST); |
| 3P-p56 |
Oscillation Characteristics of a Superconducting Stator Combined with a Ring Shaped Magnet
Shindo Ryo, Futamura Muneo (Akita Prefectural University) |
| 3P-p57 |
Military Applications of Superconductivity and Future Prospective
Sajid Saleem Sajid (NUST) |
LTSs / Applications of Cryogenics
ROOM P / 10:00 - 11:40 / Nov. 10
| 3P-p58 |
A Study of Heat treatment Effect on High Purity Niobium
JOUNG MIJOUNG (IBS); |
| 3P-p59 |
Removal of hydrogen fluoride from fluoride with a G-M cryocooler
Xu Dong, Zang Q., Liu Huiming, Shen Fuzhi, Zhang Hengcheng, Huang Rongjin, Li Laifeng (State Key Laboratory of
Technologies in Space Cryogenic Propellants, Technical Institute of Physics and Chemistry, Chinese Academy of Sciences) |
Low Carbon Society
ROOM A / 12:30 - 14:50 / Nov. 10
| 3A-a01 |
Invited Magnetic separation system for removal the stray irons from coal
and impurity from clay
ZHU Zian (Institute of High Energy Physics(IHEP)) |
| 3A-a02 |
Invited Iron Oxide Scale Removal from Boiler Feed-Water in Thermal Power
Plant by Magnetic Separation
NISHIJIMA Shigehiro (Osaka Univ.) |
| 3A-a03 |
Invited Current and Prospects of the Application of High Gradient Magnetic
Separation to Environmental Engineering Areas
Ha Dong-Woo (Korea Electrotechnology Research Institute(KERI)); Kim Young-Hun, Kwon Hee-Won (Andong National University)
|
| 3A-a04 |
Invited Optimization of loading ratio of ErN as regenerator of 4K-GM cryocooler
NAKAGAWA Takashi, MIYAUCHI Takayuki, SHIRAISHI Takuya, SEINO Satoshi, YAMAMOTO Takao, FUJIMOTO Yasushi (Osaka
Univ.); MASUYAMA Shinji (NIT, Oshima College) |
| 3A-a05 |
Invited Estimation on Control of Greenhouse Gas Emission from Wastewater
Treatment Plants by Magnetic Activated Sludge Process
SAKAI Yasuzo, NIKATA Toshiyuki, ROPPONGI Miki (Utsunomiya University); MIURA Osuke (Tokyo Metropolitan University);
SAHA Mihir Lal (Dhaka University) |
| 3A-a06 |
Invited Superconducting Heat Generator for Wind Power
OKAZAKI Toru (IAE) |
| 3A-a07 |
Invited Development of Test Device for Aluminum Metal Melting by Electromagnetic
Induction Heating Using HTS Coils
FUKUI Satoshi, ONO Ryohei, OGAWA Jun, SATO Takao (Niigata University); WATANABE Tomonori, NAGAYA Shigeo, HIRANO
Naoki (Chubu Electric Power Co., Inc.); FURUSE Mitsuho (National Institute of Advanced Industrial Science and Technology)
|
Rotating Machines 2 / Power applications 3
ROOM B / 12:50 - 14:50 / Nov. 10
| 3B-a01 |
Invited Development of High Temperature Superconducting Induction/Synchronous
Motor for Transportation Equipment - Results of 20 kW Class Prototype and Status of 50 kW Class Fully Superconducting
Model
NAKAMURA Taketsune, NISHINO Ryohei, IRIYAMA Shuhei, IKEDA Kenichi, KARASHIMA Tomoharu, GUO Siyu, OGASA Takuro,
MATSUO Tetsuji, AMEMIYA Naoyuki (Kyoto University); ITOH Yoshitaka, YOSHIKAWA Masaaki, TERAZAWA Toshihisa (IMRA MATERIAL);
OHASHI Yoshimasa (AISIN SEIKI); FURUSE Mitsuho (AIST); FUKUI Satoshi (Niigata University) |
| 3B-a02 |
Withdrawn
|
| 3B-a03 |
AC Loss Estimation of 10 MW Class Fully Superconducting Wind Turbine Generators
BA Yiqi, TERAO Yutaka, OHSAKI Hiroyuki (The University of Tokyo) |
| 3B-a04 |
Study of a new superconducting rotating machine
AILAM El Hadj, HOCINE Abdelfettah (LESI, Univ. Khemis Miliana, Algeria); DOUINE Bruno (GREEN, Univ. Lorraine,
France) |
| 3B-a05 |
STATUS OF THE NICA CRYOGENICS AT JINR
Emelianov Nikita, Agapov Nikolay, Mitrofanova Iulia, Konstantinov Anton, Emelianov Anton, Baldin Nikita (JINR)
|
| 3B-a06 |
Superconducting Electromagnetic Induction Heating for Metal Melting
NAGAYA Shigeo, WATANABE Tomonori, HIRANO Naoki (Chubu Electric Power Co., Inc.); FUKUI Satoshi (Niigata University);
FURUSE Mitsuho (National Institute of Advanced Industrial Science and Technology (AIST)) |
Evaluation and Analysis
ROOM C / 12:50 - 14:50 / Nov. 10
| 3C-a01 |
Invited In-plane Distribution of Critical Current Density in Long Coated
Conductor
KISS Takanobu, FUKUZAKI Takahiro, ICHIMURA Shougo, ONODERA Yuta, NISHIMIYA YUhei, OOFUJI Hiroaki, GUO Xiang, IMAMURA
Kazutaka, SUZUKI Takumi, HIGASHIKAWA Kohei, INOUE Masayoshi (Kyushu Univ.); FUJITA Shinji, IIJIMA Yasuhiro (Fujikura);
MACHI Takato, IBI Akira, IZUMI Teruo (AIST); JIANG Zhenan, BADCOCK Rodney, LONG Nicholas, BUCKLEY Robert (RRI, VUW)
|
| 3C-a02 |
Invited Visualization of Hotspots in REBCO Pancake Tapes and Coils by Cryogenic
Fluorescent Thermography
TSUCHIYA Yuji (Nagoya Univ.); AWAJI Satoshi, SAWADA Yuya (Tohoku Univ.); OGURO Hidetoshi (Tokai Univ.); KIMURA
Shojiro, WATANABE Kazuo (Tohoku Univ.); ICHINO Yusuke, YOSHIDA Yutaka (Nagoya Univ.) |
| 3C-a03 |
Invited Electromagnetic and Thermal Behaviors in No-Insulation REBCO Pancake
Coil
Wang Tao, Ishiyama Atsushi (Waseda University); Noguchi So (Hokkaido University); Hahn Seungyong (The National
High Magnetic Field Laboratory, U.S); Iwasa Yukikazu (Massachusetts Institute of Technology) |
| 3C-a04 |
Study on Separation of Structural Isomer with Magneto-Archimedes Method
KOBAYASHI Takayuki, MORI Tatsuya, AKIYAMA Yoko (Osaka University); MISHIMA Fumihito (Fukui University of Technology);
NISHIJIMA Shigehiro (Osaka University) |
| 3C-a05 |
Comparison of Room-temperature Magnetic Refrigeration Performance with Different Magnetic Materials
HUANG Yaxiao, OKAMURA Tetsuji (Tokyo Institute of Technology) |
| 3C-a06 |
Low temperature hydrogen absorption in metallic nanocontacts studied by point-contact spectroscopy measurements
KAWAE Tatsuya, TAKATA Hiroki, SAIFUL Islam, IENAGA Koichiro, INAGAKI Yuji, HASHIZUME Ken-ichi (Kyushu University)
|
Superconducting Bulks
ROOM D / 12:50 - 14:50 / Nov. 10
| 3D-a01 |
Invited Chemical Strategies for Improving Flux Pinning Properties of RE123
Bulks
SHIMOYAMA Jun-ichi, SATO Takumi, MATSUMARU Shusuke, MOTOKI Takanori (Aoyama Gakuin Univ.); SETOYAMA Yui, MATSUMOTO
Kazuya, KISHIO Kohji (Univ. of Tokyo) |
| 3D-a02 |
Invited Enhanced trapped field and mechanical strength in dense bulk MgB2
YAMAMOTO Akiyasu (Tokyo University of Agriculture and Technology); KISHIO Kohji (University of Tokyo); OHUCHI
Hiroshi, YAMADA Yutaka (Tokai University) |
| 3D-a03 |
Invited Magnetization of Gd-Ba-Cu-O bulk High-temperature Superconductors
IDA Tetsuya, LI Zhi, MIKI Motohiro,
IZUMI Mitsuru (Tokyo University of Marine Science and Technology (TUMSAT)) |
| 3D-a04 |
Invited Recent advances in modelling pulsed field magnetization of bulk high-temperature
superconductors
AINSLIE Mark (University of Cambridge); FUJISHIRO Hiroyuki (Iwate University) |
| 3D-a05 |
Invited Behaviour of bulk superconducting trapped field magnets subjected
to magnetic fields with a transverse component
VANDERBEMDEN Philippe, CAPS Herve, VANDERHEYDEN Benoit, FAGNARD Jean Francois (University of Liege) |
| 3D-a06 |
Invited Challenge to the higher magnetic field of the high temperature superconducting
bulk magnet for NMR
Nakamura Takashi (RIKEN); Utsumi Hiroaki (JEOL RESONANCE Inc.); Yanagi Yousuke, Itoh Yoshitaka (IMRA Material
Co., Ltd.); Naito Tomoyuki, Fujishiro Horoyuki (Iwate University) |
Superconducting Joints 2
ROOM A / 15:10 - 16:10 / Nov. 10
| 3A-p01 |
Invited Electromechanical Property Evaluation of Various Types of Ultrasonic
Weld Coated Conductor Joints
SHIN Hyung-Seop, Jung ChanHun (Andong National University) |
| 3A-p02 |
Invited A Superconducting Joint of REBCO Wire with Clad Type Tape
NAGAISHI TATSUOKI, OHKI KOTARO (Sumitomo Electric); YANAGISAWA YOSHINORI, MAEDA HIDEAKI (RIKEN) |
| 3A-p03 |
Invited Progress of the development for superconducting joint between RE123-coated
conductors by CJMB method
JIN Xinzhe, MAEDA Hideaki (RIKEN); |
Magnet Technology 2
ROOM B / 15:10 - 16:10 / Nov. 10
| 3B-p01 |
Invited The future of Large-scale Superconducting Magnet System for Fusion
DEMO
NISHIMURA Arata (NIFS); UTOH Yasuhiro, HIWATARI Ryoji, TOBITA Kenji (QST) |
| 3B-p02 |
Invited Progress of ITER Magnet and Cryogenic Systems - 4th Quarter
of 2016 -
SEO Kazutaka (ITER Organization) |
| 3B-p03 |
Invited Research and development of conduction-cooled HTS coils for ultra-high-field
MRI systems
MIYAZAKI Hiroshi, IWAI Sadanori, UTO Tatsuro, OTANI Yasumi, TAKAHASHI Masahiko, TOSAKA Taizo, NOMURA Shunji, KURUSU
Tsutomu (Toshiba Corporation); UEDA Hiroshi (Okayama University); NOGUCHI So (Hokkaido University); ISHIYAMA Atsushi
(Waseda University); URAYAMA Shinichi, FUKUYAMA Hidenao (Kyoto University) |
Superconducting Materials (LTS)
ROOM C / 15:10 - 16:10 / Nov. 10
| 3C-p01 |
Invited Science and Technology of Nb3Sn
TACHIKAWA Kyoji (Tokai Univ. and NIMS) |
| 3C-p02 |
Invited Current status and prospect on LTS wire development in China
Zhang Pingxiang (Northwest Institute for Nonferrous Metal Research) |
| 3C-p03 |
Cu alloy matrix IT-processed Nb3Sn wires of new design
BANNO Nobuya (National Institute for Materials Science); MIYAMOTO Yasuo (Tokai University); TACHIKAWA Kyoji (National
Institute for Materials Science) |
Critical Current Properties of Fe-Based Superconductors
ROOM D / 15:10 - 16:10 / Nov. 10
| 3D-p01 |
Invited Fabrications and Characterizations of 122-type Iron-based Superconducting
Wires and Tapes
Tamegai Tsuyoshi, Suwa Takahiro, Pyon Sunseng (The University of Tokyo); Kajitani Hideki, Koizumi Norikiyo (JAEA);
Tsuchiya Yuji, Awaji Satoshi, Watanabe Kazuo (Tohoku University) |
| 3D-p02 |
Invited Development of Fe-based superconducting wires and tapes at AIST
ISHIDA Shigeyuki, TSUCHIYA Yoshinori, IYO Akira, EISAKI Hiroshi, MATSUZAKI Kunio, NAKANO Akihiro, YOSHIDA Yoshiyuki
(AIST); ISHII Akira, ASO Tatsuya, ITO Shouko, NISHIO Taichiro, SHINOHARA Nobuaki, TOKIWA Kazuyasu (Tokyo Univ. of
Science) |
| 3D-p03 |
Invited Improvement of Transport Jc of PIT (Ba,K)Fe2As2 Wires by Devising Sheath Materials and Architecture
TOGANO Kazumasa, GAO Zhaoshun, MATSUMOTO Akiyoshi, KIKUCHI Akihiro, KUMAKURA Hiroaki (National Institute for Materials
Science (NIMS)) |
